Please install Woocommerce

SS wire mesh

HomeSS wire mesh

SS wire mesh
SS wire mesh
SS wire mesh

SS WIRE MESH

Metfab Impex is a leading Manufacturer, Supplier & Exporter of Stainless Steel Wire Mesh in India, offers wide range of Wire Mesh with varied aperture sizes along with wire diameter and weaves. Their texture also varies from being fine, soft, and flexible as silk to as rigid as steel plate. Stainless Steel is available in 202, 304, 304L, 316, 316L grade.

Wire Mesh is a combination of weft and warp wire. Wire Mesh is available in Roll form or in cut size such as circle as per customer requirement. As a result, we have carved a niche for ourselves as one of the most prominent supplier of Wire Mesh.

On request, we can also provide the same in some other metals like – Monel, Nickel, Hastelloy, Phosphorous Bronze, Copper and Brass.

Stainless steel wire mesh commonly used width: 1 meters, 1.2 meters, 1.5 meters, 2 meters, Stainless steel wire mesh general length is in 50 feet and100 feet

TYPES OF WIRE MESH WEAVING

Plain Weave Stainless Steel Wire Mesh

Each warp wire crosses up & down through each weft & the diameter of the wire is the same as that of the weft wire.

Twill Weave Stainless Steel Wire Mesh

Each warp wire crosses over two weft wire, and each weft wire crosses over and under each of the two wire wires.

Density woven stainless steel wire mesh

warp & weft wire diameter is different, the number of mesh is also different, characterized by dilute weft density.

Seam net twill weave stainless steel wire mesh

Each diameter wire crosses over & above every two wefts & each weft crosses & passes through each of 2 wire diameters.

Double Wire Dutch Woven Wire Mesh

This weaving is very similar to the Dutch twill weave. There are 2 wires that can be stacked tightly against the warp wires.

Five-strand woven stainless steel wire mesh

This woven warp and weft wire is not made of monofilament but is woven with several separate wires.

CHEMICAL COMPOSITION

 

GRADE C
MAX
MN
MAX
P
MAX
S
MAX
SI
MAX
CR
MIN/MAX
NI
MAX
MO
MAX
304 0.08 2.00 0.05 0.03 1.00 18-20 18-10
304L 0.03 2.00 0.05 0.03 1.00 16-18 18-12
316L 0.08 2.00 0.05 0.03 1.00 16-18 10-14 2-2.25
316L 0.03 2.00 0.05 0.03 1.00 16-18 10-14 2-2.25